Based on the source of the Mikrotik wiki, Netinstall is an application running on a Windows desktop that allows you to install MikroTik router os mikrotik to PC or to RouterBoard via Ethernet network. NetInstall is also used to reinstall the os mikrotik router in cases where previous installations fail, become corrupted or missing access passwords. Your device must support booting from ethernet, and there must be an ethernet link directly from the netinstall desktop to the target device. All RouterBOARD support for PXE boot network, must be enabled either inside router menu os mikrotik 'Routerboard' if router os mikrotik operating, or in bootloader settings. For this you will need a serial cable The PXE mode Boot Routerboard device For RouterBOARD devices without serial port, and no os mikrotik router access, reset button can also start PXE boot mode. See RouterBOARD PDF instructions for details.

Instal Mikrotik Menggunakan. Tulisan ini berisi panduan dan langkah-langkah untuk meng-update BIOS ASUS dengan mudah dan aman menggunakan fitur ASUS EZ Flash. Biasanya flashdisk dipakai untuk instal ulang komputer dll. So, for example we have Jika kamu menggunakan Mikrotik type Router board. However, after connecting via USB->serial converter, using PuTTY, I'm unable.

For example RB750 PDF Netinstall can also directly install os mikrotik router on disk (USB / CF / IDE / SATA) connected to Windows netinstall machine. After installation just move the disk to the Router machine and boot from it. • 'How to use Netinstall'? Following his step: • NetInstall Software - downloaded from Mikrotik Indonesia • UTP cable Mikrotik file software according to the type (x86, mpsbe, mipsle) in this case because mengunakanan RB750 then using router os mikrotik mipsbe.

In some literations there should be serial cable, but I have tried serial cable and it works. The function of this serial cable will be to change the boot flow from devices that by default boot from the internal disk to boot from the network.

Yes, but: It would be extremely neat and handy to be able to insert a USB stick 'with the equivalent of the.ISO' Boot from USB, run the installer which then puts ROS on the default (main) partition (compact flash or DOM) I know this is really only an issue for x86-users where netinstall might not be an option. YVMV Regards I understand and we'll see how hard it is to make, but as I said - you can simply place the soon-to-be-router HDD in a windows machine, Netnstall it, move it back to it's own PC and boot to install. I understand that it's not so quick as the suggested way, but at least it's a working way. Ya I would agree don't put it high on the list. MLPPP is a much more needed function.

I use USB sticks to install windows, and it works quite well. And yes, I know you 'burn' the ISO, but the question is why can't you put a ISO on a Flash drive. I can burn a CD ISO on a DVD, so whats the difference? Why would it not see other controllers during an installation? Because 'burning an iso' is quite different than copying an iso (to a flash drive).